camd v3.814

Buyurun !

[fsenes]

Bu emu ile legal dt card çalışıyormu?
Cevap evet ise config dosyasını yapıştırabilirmisiniz lütfen.

Bu emu ile legal DT kartı çalışıyor - yukarıda ki dosyada herşey mevcut
ama yinede problem yaşayacak olursan hangi img kulanıyorsun onu yaz,
bizde ona göre yönlendirelim.

[fsenes]

Hemen cevap için çok tşk.
7000s de gemini 2.40 ve ruDREAM final ve daVinci5
hiç birinde çalıştıramadım !

gemini 2.40 Newcamd'ta seyretmen için adonslardan cam config indirmen lazım.
Davinci5 Newcamd indir ve seyret - hiçbir problem yok!
Her iki img içinde scam problemsiz çalışıyor!

Kolay gelsin!

[fsenes]

newcamd ve scam/ucasda sorun yok
ben camd3 ü kasdetmiştim

camd3 ile de sorun yok - Gemini img'de camd3 config indir !
Davinci5 - hiçbirşey yapmana gerek yok !

[fsenes]

config dosyam:

# Wenn Parameter gebraucht wird - '#' entfernen und eure Werte reinsetzen!!!!!
#
#
#
# Boxtyp(optional): 1-dbox2, 2-dm7000, 3-dm7020, 4-dm500, 5-dm56xx/Triax; Default ist 2
# BOXTYPE=1
#
# UDP Port(optional); Defailt - 20248
UDP_PORT=24110
# TCP Port(optional); Defailt - 0 (TCP-server ausgeschaltet)
#TCP_PORT=24110
# Log(optional): 0 - keine Ausgaben, 1-Datei, 2 - Console, 4 - UDP(syslog), 3 - Console+Datei, 5 - UDP+Datei, 6 - UDP+Console, 7-UDP+Console+Datei; Default ist 2;
LOG=6
# Host für UDP-logging
#LOG_HOST=192.168.0.5
# Port für UDP-logging(optional); Default ist 514
LOG_PORT=514
# Logfile
#LOG_FILE=/mnt/hdd/var/log/camd3.log
# Pfad zum User-File(optional); Default ist /var/***s/camd3.users
#USERS=/var/***s/camd3.users
# Pfad zum Server-File(optional); Default ist /var/***s/camd3.servers
#SERVERS=/var/***s/camd3.servers
# Pfad zum ***-File(optional); Default ist /var/***s/camd3.***s
#***S=/var/***s/camd3.***s
# Pfad zum Socket-File(optional); Default ist /tmp/camd.socket
#SOCKET=/tmp/camd.socket
# Multichannel mode (optional): 0-aus, 1-ein; Default ist 0
MULTI=1
# Kartenslots (anzahl beliebig)
# je eine Zeile für Slot:
# SLOT=devicename:type:au_g:au_s:au_u:port:username: password:des***
#
# des*** für normale Slots ist optional, aber port,username und password müssen immer angegeben werden!!!
#
# devicename: Pfad (volständig) zum Device, oder Hostname von cardserver(newcamd)
# type: 1-******, 2-intern(dreamox), 4-cardserver(newcamd)
# au_g: 1-eingeschaltet, 0-ausgeschaltet
# au_s: 1-eingeschaltet, 0-ausgeschaltet
# au_u: 1-eingeschaltet, 0-ausgeschaltet
# port: port
# username: loginname
# password: loginpassword
# des***: cardserver des*** (14 byte)
#SLOT=/dev/tts/0:1:1:1:1:997:mastercrd:password1
SLOT=/dev/sci0:2:1:1:1:999:slotunten:password3
SLOT=/dev/sci1:2:1:1:1:998:slotoben:password2
# Newcamd-client, Eingestellt für NewCS....
#SLOT=127.0.0.1:4:1:1:1:10000:local:local:01020304 05060708091011121314
#SLOT=127.0.0.1:4:1:1:1:10001:dummy:dummy:01020304 05060708091011121314

start script:

#!/bin/sh
########################################
###### Powered by The Gemini Team ######
### http://www.i-have-a-dreambox.com ###
########################################
# camid #
# 0000 = Commom Interface #
# 0001->0199 = for User Experiment #
# 0199 = Dccamd #
# 0200->0299 = Fbiss #
# 0300->0399 = Camd3 -OLD #
# 0400->0499 = Camx #
# 0500->0599 = Camx-Radegast-CS #
# 0600->0699 = Evocamd -OLD #
# 0700->0799 = Evocamd_ronlad_cs -OLD #
# 0800->0899 = Mgcamd -OLD #
# 0900->0999 = Mgcamd_ronald_cs -OLD #
# 1000->1099 = Newcamd -OLD #
# 1100->1199 = Newcamd-ronald_CS -OLD #
# 1200->1299 = Newcamd-spider -OLD #
# 1300->1399 = Radegast #
# 1400->1499 = Ronald-CS #
# 1500->1599 = Scam #
# 1600->1699 = Scam-Ronald-CS #
# 1700->1799 = MPCardserver #
# 1800->1899 = NewCS #
# 2000->2099 = Camd3 #
# 2300->2399 = Camd3-NewCS #
# 2600->2699 = Camd3-MPCardserver #
# 3000->3099 = Evocamd #
# 3100->3199 = Evocamd-Ronald-CS #
# 3200->3299 = Evocamd-NewCS #
# 3300->3399 = Evocamd-MPCardserver #
# 4000->4099 = Mgcamd #
# 4100->4199 = Mgcamd-Ronald-CS #
# 4200->4299 = Mgcamd-NewCS #
# 4300->4399 = Mgcamd-MPCardserver #
# 5000->5099 = Newcamd-Betad #
# 5100->5199 = Newcamd-Cardserver #
# 5200->5299 = Newcamd-Spider #
# 5300->5399 = Newcamd-NewCS #
# 5400->5499 = Newcamd-MPCardserver #
# 9500->9599 = reserved #
# 9600->9699 = reserved #
# 9700->9799 = reserved #
# 9800->9899 = reserved #
# 9900->9999 = reserved #
########################################
CAMNAME="Camd3.814"
USERNAME=""
ZAPTIME=6
CAMID=2089
DVBSET=3
INFOFILE="ecm.info"
# end
case "$1" in
start)
echo "[SCRIPT] $1: $CAMNAME"
/var/bin/camd_3814 &
;;
stop)
echo "[SCRIPT] $1: $CAMNAME"
/var/bin/pcamd_3814 -kill
sleep 5
killall -9 camd_3814 pcamd_3814
;;
*)
$0 stop
exit 1
;;
esac
exit 0

vede maalesef çalışmıyor !!!!!

[bado6100]

Aynen, DM500'de de durum farkli degil.